Rockford Fosgate M5-800X4

UUTUUS !

800 Watt 4-Channel IPX6 Element Ready™ Amplifier

4-kanavainen tehokas ja kompakti päätevahvistin Harrikkaan, veneeseen tai vaikka mönkijään.


599,00 €
Hinta sis. ALV Veroton hinta 477,29 €

Rockford Fosgate M5-800X4 - 800 Watt 4-Channel IPX6 Element Ready™ Amplifier

The M5-800X4 amplifier features the next level of Element Ready™ design from Rockford Fosgate that's built as rugged as the outdoor environment it's used in. The IPX6 rating is provided by splash guards on both ends and heavy-duty molded harnesses with integral sealing gaskets. A new PRESET switch - for use with Rockford Fosgate UTV audio kits - eliminates the need to set-up and tune the amp for the best experience possible. Built on the popular TM series, M5 amplifiers feature the same great technologies like Constant Power, Class-AD and C.L.E.A.N., all engineered, developed, and validated in Tempe, Arizona.
FEATURES AT A GLANCE

  • Element Ready™ design with integrated harness & panel seals
  • PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
  • Constant Power provides instantaneous delivery of output over varying impedance loads
  • Play all day, easy to integrate, and keep music playing for extended lengths of time
  • C.L.E.A.N. input/output clip detection and indicator LEDs
  • Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
  • OEM and aftermarket radio integration inputs
  • Top mounted control panel with Element Ready™ smoked lens cover
  • Proprietary testing using RATS (Rockford Automated Testing System)
  • Low Impedance Stability
  • Proprietary Class-AD technology allows amplifier to produce more power with less current draw
  • Discrete Surface Mount technology utilizes 1% tight-tolerances for high efficiency and reduced cross-talk
  • MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
  • Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
  • Balanced Differential Inputs eliminates noise picked up by signal cables
  • Remote-Out feature when using high level inputs


Specifications

  • Number of Channels: 4
  • Total Power (Sum of Rated Power): 800 Watts
  • Rated Power (RMS Continuous Power)
    • CTA-2006 Guidelines CTA-2006 Continuous Power Rating
    • 100 Watts x 4 @ 4Ω
    • 100 Watts x 4 @ 2Ω
    • 200 Watts x 2 @ 4Ω Bridged/Mono
    • ≤1.0% THD+N
  • Dynamic Power (PVC/PowerCube®)
    • CTA-2006 Guidelines CTA-2006 Dynamic Power Rating
    • 125 Watts x 4 @ 4Ω
    • 200 Watts x 4 @ 2Ω
    • 400 Watts x 2 @ 4Ω Bridged/Mono
  • Bridgeable: Yes
  • Frequency Response: 10 Hz - 50 kHz
  • Input Sensitivity: 150mVrms - 12Vrms
  • Circuit Topology Class: Class-AD
  • Efficiency (average): >75%
  • Total Harmonic Distortion (THD+Noise): <0.25% THD+N @ 1 Watt
  • Signal Input
    • Low-Level: 4 RCA
    • High-Level: (2) 4-Pin Molex
  • Tone Controls
    • Front/Rear: 0-14dB @ 12.5kHz
    • Front/Rear: 0-18dB @ 45Hz
  • Crossover Controls
    • High-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
    • Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
    • All-Pass: Yes
  • Remote Controls: No
  • Visual Indicators
    • Power: Blue
    • Protect: Red
    • Input Clip: Red
    • Output Clip: Blue/Red
  • Power Wire Gauge: 8 AWG
  • Power Input Connector: Compression Terminal Block
  • Speaker Wire Gauge: 16 AWG
  • Speaker Output Connector: 4-Pin Molex
  • Cooling: Convection
  • Heatsink: Extruded Aluminum
  • Operating Voltage: 9 - 16 VDC
  • Max. Current Draw (13.8V Sinewave)
    • 55 A @ 4Ω
    • 85 A @ 2Ω
    • 90 A @ 4Ω Bridged
  • Suggested Alternator
  • Dimensions (H x W x D): 42.8 mm x 108 mm x 213 mm
  • Shipping Weight: 1.9 Kg