Canor Audio Virtus i2 -integroitu vahvistin

Tulossa !

Uutuus Canor Audiolta !

Class A -integroitu putkivahvistin.

2x40W  ( 4 Ohm, 8 Ohm ) -Ultralinear

2x20W ( 4 Ohm, 8 Ohm ) -Triode


Esittelyssa Helsinki High End 2024-messuilla !



Valitse variaatio:

9 290,00 €

Tuotetiedot:

The Virtus I2 is a new-generation tube amplifier that utilizes KT88 high-power tubes and features an entirely new topology.
The goal of its development was to enhance the superior sound quality of the previous model version. This amplifier runs in a pure class A with an auto-bias function, as well as cathode feedback.

The "Virtus" was a specific virtue in Ancient Rome and it carries connotations of valour, manliness, excellence, courage, character, and worth, perceived as masculine strengths.

Ominaisuudet:

  • an integrated tube amplifier operating in class A, providing an output power of 2 x 40 W
  • KT88 high-power tubes with autobias with a cathode feedback
  • an option to switch between triode and ultra-linear mode instantly
  • PCB's utilize our premium CMT ™ technology
  • perfect channel separation using a relay attenuator that features individual blocks for each channel. The gain control is in increments of 1 dB and attenuates up to 63 dB
  • the independently powered control part
  • capacitors with high capacitance in the filter provide energy for precise and well-defined bass
  • the signal path exclusively contains high-quality polypropylene capacitors
  • precise selection and pairing of the tubes meeting above-average parameters
  • the synchronous control option allows the use of two amplifiers in a monoblock mode without the need for an extra preamplifier. This Master/Slave mode has an output power of 80 W per channel

Tekniset tiedot:

Output power 2 x 40 W /4,8 Ω – ultralinear, 2 x 20 W /4,8 Ω – triode

Gain -30 dB (at 8 Ω)

-28 dB (at 4 Ω) 

Inputs sensitivity 500 mV 

Frequency range (10 – 50 000) Hz ±0,5 dB / 5 W 

Input impedance 30 kΩ 

Inputs 4 x RCA, 2 x XLR (XLR are active in monoblock connection only)

Outputs 1 x RCA Line-out (Line fix) 

Total Harmonic Distortion <0,05% / 1 kHz, 5 W 

Signal-to-noise ratio > 95 dB 

Filtration capacity 2200uF / 500V 

Damping factor at 4 Ω load at the output 9 (based on measured output impedance)

Damping factor at 8 Ω load at the output 10,5 (based on measured output impedance)

Tube complement 4 x KT88 / 1 x 12AX7 / 2 x 12AT7 

Power 230 V / 50 Hz / 375 VA 

Input power 220W 

Dimensions (w x h x d) 435 x 170 x 485 mm 

Weight (net) 26 kg